Would You Like To Build A Tiny Home Using Only A Screwdriver?
The Quick Cabin is a modular, lightweight, rugged, insulated, and easy-to-set-up cabin that can be used for a variety of uses, from tiny house living, guest house, backyard office, or studio. The cabin comes as a complete kit and the only tool that is required for setup is a simple screwdriver. The Quick Cabin components are UV-treated which makes for a long-lasting shelter. The shape of the Quick Cabin's walls creates a surprising amount of usable space without a large footprint.
Would You Like To Build A Tiny Home Using Only A Screwdriver?
Each modular component of the Quick Cabin is very lightweight, none exceeding 30 pounds, making the cabin easy for anyone to set it up. If you need more space the extension kit can also be purchased for the Quick Cabin. As many as two extension kits may be added to the Quick Cabin. Each extension kit increases the length of the Quick Cabin by 2 panels.
Would You Like To Build A Tiny Home Using Only A Screwdriver?
The panels are rotationally molded from the building material of polyethylene, which is known for being highly puncture-resistant, very robust, and also UV resistant. The Quick Cabin uses a linear low-density polyethylene (LLDPE), as it was found to have the right mixture of strength and flexibility to guarantee the panels of the cabin will always fit together and provide a strong, durable shelter for many years to come. The cabin panels are foam-filled to add strength and insulation. To assemble the Quick Cabin the panels are connected at the top, the middle, and the bottom with interlocking tabs using simple screws.
Would You Like To Build A Tiny Home Using Only A Screwdriver?
The cabin has a water-tight edge gasket that provides a seal between the panels. Each cabin panel has a sturdy tie-down ring on both the inside and outside. There are threaded inserts on the interior wall of each cabin panel, making it a snap to install furnishings. When not in use, the panels nest together for compact storage or shipping. The following are other essential parts of the Quick Cabin.
Would You Like To Build A Tiny Home Using Only A Screwdriver?
Door Assembly. The door frame is made of lightweight aluminum tubing and replaces any two wall panels on the Quick Cabin. The door is both lightweight, and sturdy and is installed on lift-off hinges, making it easy to transport and handle. All the surfaces on the door assembly are UV-treated and backed with foam for insulation.
Would You Like To Build A Tiny Home Using Only A Screwdriver?
Windows. The windows are made from shatterproof acrylic that will not yellow with age, the swing-out window is operated by a locking push handle. The windows have a replaceable screen and a simple push-in curtain rod that is supplied with each window panel. Roof.
Would You Like To Build A Tiny Home Using Only A Screwdriver?
The roof is made of a lightweight aluminum framework that slips together and is easy to assemble with just a screwdriver. The 3-layer roof cover consists of a heavy-duty vinyl outside, a lofty middle insulation layer, and a protective lightweight inner membrane. The insulated cover quickly attaches to the frame with button snaps and a pre-laced cord that engages hooks on the perimeter of the frame. There is a 14-inch RV ceiling vent that is included in the cabin kit, which is easily installed from the inside once the roof is set up. There is also an LED light ring around the vent which provides adequate lighting for the entire shelter.